Color Enhancer Sealer Low VOC
Solvent based single component with 30 minute working time and 1 hour dry time.
Gloss coverage 250-300 sf per gallon over rough surface. Satin 350-400 sf over gloss primed surface.
Gloss or Satin options.
Color Enhancer Sealer Low VOC is a clear, single component, solvent based sealer glaze. It comes in a gloss “WET LOOK” and satin “CLEAN SHEEN” finishes with great UV and stain resistance. This low VOC solvent base allows the material to penetrate and adhere to concrete, porous brick and tile, and most types of decorative acrylic cement coatings.
Gloss version is designed to seal and create a “wet look” on concrete, exposed aggregate, stamped plain and colored concrete, porous brick, unglazed tile, natural slate and stone, stucco, adobe and flagstone and many other masonry surfaces. A “clean sheen” satin is also available and can be used on all the surfaces described above as the finish coat when applied over the Gloss as its primer coat.
Sealer as a primer coat can be reduced with up to 10% acetone to increase absorption, increase coverage, increase working time and reduce bubbling from substrate breathing.
- UV Resistant
- Fast Drying
- Gloss wet finish or Satin clean finish
- Easy to Use
- Excellent Adhesion
- Excellent ability to revive color of surfaces previously sealed that are years old
- Can be used indoors as the aromatics are far less than those of the old version. Cautions for combustible vapors still apply.
- VOC compliant all states and counties in the USA
Neither gloss nor satin are recommended for sealing epoxy floors.
- Recoat in 30-60 minutes.
- Foot traffic in 4-8 hours.
- Heavy traffic 72 hours.
Weight | 11 lbs |
---|---|
Dimensions | 9 × 9 × 9 in |
Finish | Gloss, Satin |